Scilab

Chapter 15.XCOS-How to download the Schems.zip file from the Internet?

Chapter 15.1 Downloading a file with block diagrams.
Download from the Internet by clicking
https://www.pidlaboratory.com/Schems.zip
and write it down somewhere. I will save it in the Schematy folder.
Note
The file download may vary slightly depending on the condition of your computer.
For me it looks like in animation Fig. 15-1. You can do it!

Fig. 15-1
How to download a file with diagrams?
Before the animation starts, you see the last stage of the animation, showing the folder with the schematics. Each file corresponds to the diagrams that are included in video animations in chapters 9…14. For example, the block diagram from the file 12-3.zcos corresponds to the animation in Fig. 12-3 from Chapter 12. The files will be useful, when you are unable to create a block diagram based on the animation. Also when the block diagram is the same as in the course, but the time courses are not different. Then check the settings of individual blocks, e.g. clock, oscilloscope, summations… and in the Simulation/Set parameters tab.
Remember that Simulation/Set parameters/Final inegration time should be the same as the oscilloscope’s Set CSCOPE block parameters/Refresh period.

Chapter 15.2 Testing the 12-3.zcos file


Fig. 15-2
Running the simulation from the 12-3.zcos file
You invoke the Scilab/Xcos program… etc. as in the animation. And in it you run the 12-3.zcos file.
The time course should be exactly the same as in Fig. 12-3 chapter 12.
How to check the parameters of this file?

Chapter 15.3 Checking the parameters of the 12-3.zcos file

Fig.15-3
Checking the parameters of the 12-3.zcos file
The parameters of the file you created should be identical.

Leave a Reply

Your email address will not be published. Required fields are marked *

Scroll to Top